PRODUCTS
Ball Valves
Triad Series
Ball ValvesFlow-Tek's Triad Series ball valves feature live loaded stem seals and a redundant body seal design. Available in full and standard port models, these rugged, high pressure three piece valves are ideal for process, severe service, high temperature, and high cycle applications.
MORE DETAIL
Triad Series Model HP
Ball ValvesFlow-Tek's Triad Series valves are known to be one of the strongest, most robust three piece ball valves in the industry. With advanced seat and seal materials, the Triad rating can be extended to handle service pressures to 5000 psi and a temperature 550°F.
MORE DETAIL
Series 5000/6000 Three Piece Ball Valve
Ball ValvesFlow-Tek's Series 5000/6000 ball valves offer the convenience of a three piece body design at an economical price. The three Piece design with a swing out center section allows for ease of in-line and out-of-line maintenance. Standard valve bodies are investment cast CF8M Stainless Steel or WCB Carbon Steel. All body castings are marked with a foundry heat number for full traceability.
MORE DETAIL
Series 7000/8000
Ball ValvesFlow-Tek’s Series 7000 & 8000 ball valves offer the highest flexibility in selection of end connections, seat materials and three piece design. To meet customer demands for a valve with the widest possible range of applications, these valves can be fitted with control or tri-ported balls (for full cavity drainage), as well as cavity fillers for special service requirements.
MORE DETAIL
Series DM7000/DM8000 Direct Mount
Ball ValvesThe Series DM7000/DM8000 design is based on the series 7000/8000 with extensive interchangeability of the majority of the parts between the two series.
MORE DETAIL
Tank Series Ball Valve
Ball ValvesThe Flow-Tek Tank Series ball valves are welded flush to the tank bottom, providing a fast, unrestricted drainage of tank media. The valves are available in a wide selection of seat materials to meet a full range of applications.
MORE DETAIL
Series S7500/S7700
Ball ValvesFlow-Tek’s Micro Pure Series ball valves have been specifically designed to meet the requirements of high purity applications in accordance with ASME BPE specification. All valve bodies are investment cast CF3M (316L) Stainless Steel with an internal surface finish of 15 Ra with 20 Ra maximum per SFV-1. Other grades of surface finishes, including electropolishing are available. Cavity fillers and purge ports are also available upon request.
MORE DETAIL
Series S20/FS20
Ball ValvesFlow-Tek's Series S20 ball valves offer a compact, one piece body design. The one piece body supplies maximum structural strength while minimizing the number of potential leak paths.
MORE DETAIL
Series S40
Ball ValvesFlow-Tek's Model S40 ball valves offer an economical compact, one piece body design. The one piece body supplies maximum structural strength while minimizing the number of potential leak paths. Model S40 valve bodies are high quality investment cast 316 Stainless Steel.
MORE DETAIL
Series S40
Ball ValvesFlow-Tek's Model S40 ball valves offer an economical compact, one piece body design. The one piece body supplies maximum structural strength while minimizing the number of potential leak paths. Model S40 valve bodies are high quality investment cast 316 Stainless Steel.
MORE DETAIL