PRODUCTS

All Category

Series 6P P/P Pneumatic Positioner

Series 6P P/P Pneumatic Positioner

Controls

The Bray Series 6P positioner provides outstanding control for a wide range of quarter-turn valves. This design provides fast, sensitive response characteristics to meet the most demanding control objectives using a 3-15 psi pneumatic control signal.

MORE DETAIL
Series 63 Solenoid

Series 63 Solenoid

Controls

These units can be used with either spring return or double acting actuators where on/off electrical operation is required. Units have 1/2” NPT conduit connections and IP65 DIN units have cable gland PG9 connectors, also available with 1/2” NPT conduit adapters. The coils are UL recognized and CSA certified. All Series 63 solenoids carry the CE mark.

MORE DETAIL
Series 62 Solenoid Valve

Series 62 Solenoid Valve

Controls

Bray Controls offers the high flow Series 62 solenoid valve featuring a modular, pilot operated spool control valve that is convertible from 4-way (5/2) to 3-way (3/2). The 4-way solenoid valve can be used on direct acting or spring return actuators. It can also be converted to a 3-way valve for use on spring return actuators with the use of the optional conversion kit.

MORE DETAIL
Series 55 Filter Regulator

Series 55 Filter Regulator

Controls

The Bray Series 55 Filter Regulator is a 5 micron filter designed to provide nominal filtration removal of solids and liquids from the compressed air with accurate control to any pneumatic control device and are strongly recommended for use with the Bray Series 64 and 6A positioners.

MORE DETAIL
Check Valves Bray/Rite

Check Valves Bray/Rite

Check Valves

Ritepro’s Bray/Rite wafer combination swing check valves are flow activated and Rite Sized. Bray/Rite inlet ports and disc have been shape optimized to achieve a fully open position at low flow rates (3 ft/s on average). Therefore, the Bray/Rite operates exceptionally well in the flow rates typically found in pipelines containing control valves and lines with varying media flows.

MORE DETAIL
SA-01 Bray/Rite

SA-01 Bray/Rite

Check Valves

Provides additional external force to anticipate closure in applications where rapid media flow reversal requires the valve to close faster than standard.

MORE DETAIL
SA-40 Bray/Rite

SA-40 Bray/Rite

Check Valves

Provides additional force to anticipate valve closure, using an enclosed compression spring, in applications where rapid media flow reversal requires the valve to close faster than standard.

MORE DETAIL
SA-16 Bray/Rite

SA-16 Bray/Rite

Check Valves

Where increased cracking pressure is required. Wastewater service or where suspended solids are present in the process (the weight will insure inertia induced positive closure). Relief valve with adjustable cracking pressure.

MORE DETAIL